New Upgraded Proxmark3 Develop Kits 5.0 Proxmark NFC PM3 RFID Reader Writer HF L

Description

New Upgraded Proxmark3 Develop Kits 5.0 Proxmark NFC PM3 RFID Reader Writer HF LF antenna CARD UID T5577 changeable copier crack
New Upgraded Proxmark3 Develop Kits 5.0 Proxmark NFC PM3 RFID Reader Writer HF LF antenna CARD UID T5577 changeable copier crack
Proxmrk3 equipment is a professional equipment that requires knowledge and learning. After careful study, it basically supports all RFID card reading and writing functions and data modification functions on the market. (Including 14443A (S50/S70/Ultralight/Ultralight CUL-C/UL /Desfire/NTAG203/NTAG213/NTAG215/NTAG216, etc.), 15693 (ICODE SLIX ICODE2 ICODE SLI-S, etc.) H-ID, EM4100, EM4305, T5577, INDALA, AWID, 1443B and other protocol cards) The latest series of ordinary handhelds or other NFC decryption devices due to the limitations of the hardware itself, no matter how to upgrade which generation only supports some simple cards such as 1443A type S50, EM4100, H-ID card, etc., it cannot solve the full encryption card. New cards, domestic cards and other shortcomings of more protocol cards. The former is an open source product based on FPGA chip development. After more than 10 years of optimization history by global lovers, it basically supports contactless cards of all protocols. The latter is just based on For ordinary RFID chip development, the two are not products of the same level and cannot be compared at all. Note: 1.When PM3 is connected to the computer to operate the IC card, the power switch of the chameleon and the ID function switch must be turned off, otherwise the device cannot operate normally. 2. The device comes with a lithium battery. When operating the chameleon, turn on the chameleon switch on the left and connect the data cable to the USB port of the chameleon on the right. Operate the OLED offline copy ID function, turn on the corresponding switch to use, if the screen is not bright, connect the right chameleon usb port to charge. ) 2.The LED is a two-color LED. The left light will display different colors when charging and when it is full, and the 4 lights on the right will display different colors when the chameleon switches between different channels. 3.The prototype lithium battery is external. The official version is more convenient to install in the middle of the machine. It can be operated independently, or it can be disassembled and replaced by a larger capacity 3.7V battery. 5. Simple operation process of the ultimate version: Turn on the ID function switch --- put the original card in the ID low frequency area --- press the ID card reader button Note: If you can read the ID card, put the corresponding ID copy card and press the ID write card button. If you can’t read it, it means the IC card, turn off the ID function switch and connect to the computer for decryption)